Payment & Shipping Terms:
|Driving Mode:||Variable Frequency Motor And Timing Bel||Stroke:||762mm (+ 50mm)|
|Rate:||8 ~ 12 Times / Min||Holder With The Up And Down Adjustment Range:||80mm～500mm|
|Control Mode:||PLC And LCD Display||Design Standard:||Bifma X 5.1 Clause 17|
furniture testing equipment,
fatigue testing equipment
LCD Display Chair Caster / Base Furniture Testing Machines Abrasion Resistance Test Machine
To evaluate the ability of chair base and casters to withstand fatigue stresses and wear caused by moving the chair back and forth. Seat surface to place the weight (113 kg), the holding fixture driven by motor and timing belt move to and fro, in order to assess the the casters of wear life, stroke rate and the number of times can be set.
1.Chair Caster Durability Tester is used to evaluate the quality and wear life of the caster in chair.
Bifma × 5.1-2011 Section 17, X5.5 Section 18, X5.9 Section 11
Effective stroke 900 mm
Standard loading pad, loading tray * 1, weight: 113kg
Test speed: 10 CPM
Main technical parameters:
|Standards||Bifma 5.1 section 17, Bifma 5.5 section 8, Bifma 5.9 section 11|
|Drive mode||frequency conversion motor and timing belt|
|Stroke||762mm (+ 50 mm)|
|Rate||8 ～ 12 times / min|
|Up and down adjustment range of clamping tool||80mm ～ 500mm|
|Control mode||PLC and large LCD display|
|Test point||the starting point can be adjusted by itself|
|Voltage||220V single phase, 900W|
1. A load-bearing base with a weight of 23 kg divided into 9 equal parts, a 10 kg weight is placed in each square, the overall weight is equal to 113 kg.
2. The base obstacle block can be removed and used for smooth surface barrier-free block testing.
Contact Person: salesmanager
Framework: 1 framework with traverse member and base plat 1200mm ×1200 mm , 12mm thick, galvanized steel
Rotation test axis: 1 electromotive test axis for the rotation of the turning knob, position-controlled, rotation angle +/- 360°
Pneumatic test axis: 1 pneumatic test axis for seat, load controlled, position diameter 80mm, stroke 500mm
Number and Cycles: Can be set by PLC ( 0- 99,999)