What tests should be done for the protective film?
The PE protective film is made of special polyethylene (PE) plastic film as the base material, and the polyester resin as the main material of the pressure-sensitive adhesive, and is processed by several special additives. Soft nature, good adhesion performance, easy to paste, easy to peel, peeling without residue.
The parametric viscosity of the protective film refers to the amount and quality of the glue applied. The quality of the protective film is determined by the quality of the glue and the quality of the original film. So how do we know the quality of the protective film, today we will make a demonstration of the method of protective film quality testing for everyone.
1). Mechanical property testing:
1.Peel strength: It is used to peel off the PE plastic mask of the protective film from the silicone-coated release test.
HD-B609 / HD-B609B-1 Peel test machine
2.Sticking strength: It is used to detect the initial adhesive performance and lasting adhesive performance of the protective film, to prevent it from falling off after a period of use.
HD-C525 Initial viscosity tester
HD-C524 Five groups sticking tester
3. Elongation: It is used to detect the elongation and toughness of the protective film. Good toughness has good elasticity and elongation, and strong impact resistance; poor toughness, brittleness, and easy to tear, poor impact resistance.
HD-B609 / HD-B609B-1 type extension testing machine
2). Environmental tolerance test:
1. Aging resistance test: 300W ultraviolet rays are irradiated under 50 conditions for 240 hours, without cracking, deformation, and no residual glue on the surface.
UV ultraviolet accelerated aging test chamber HD-E802
2. Moisture resistance test: 1 hour of light + 1 hour of rain and 240 hours of rain will not fall off, there is no residual glue on the surface after peeling.
HD-E702 humidity resistance test chamber
Our company specializes in the production of real manufacturers of adhesive tape testing instruments, with more than ten years of production and sales experience. Welcome manufacturers of protective films and other manufacturers to come to our company to consult adhesive tape testing instruments------Sales & Support: 86-0769-89055588
Contact Person: Mr. Mak