Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Services
Dongguan Haida Equipment Co.,LTD
Home News

Power-saving skills of constant temperature and humidity test chamber

China Dongguan Haida Equipment Co.,LTD certification
China Dongguan Haida Equipment Co.,LTD certification
The instruments you recommend are very suitable for the testing needs of our laboratory products, after-sale is very patient to answer all our questions, and guide us how to operate, very nice.

—— Div Harish

You are very professional partners and we are willing to establish long-term cooperative relations with you.

—— Wojtek Krawczyk

On behalf of the company to visit your factories and companies, the technical staff is very professional and patient, I think I would be happy to cooperate with you again.

—— Manuel Munoz

I'm Online Chat Now
Company News
Power-saving skills of constant temperature and humidity test chamber

In modern life, "low carbon" has become a living habit and trend, which not only makes our lives better, but also saves production costs. Below we introduce some common power saving tips for constant temperature and humidity test chambers, hoping to help everyone.

 

1. Placement position: The constant temperature and humidity test chamber should be placed in a cool and ventilated place, away from direct sunlight, away from heat sources, and proper space should be left on the left and right sides of the top of the constant temperature and humidity test box and the back when placed to facilitate Heat dissipation. Because the high ambient temperature around the constant temperature and humidity test chamber will increase the power consumption of the test chamber.

 

2. After the constant temperature and humidity test chamber is used for a period of time, some frost will be produced. If the defrost cannot be performed regularly, the refrigeration effect will be affected, and the power consumption will increase, and the compressor may even be damaged. Therefore, whenever the thickness of frost is more than 7cm, it should be defrosted.

 

3.Every time you open the door of the box, there will be exposed cold air and hot air intruding, so you have to run the compressor again for cooling. Therefore, when accessing samples, try to reduce the number of door openings and opening time, open and close the door quickly, and the door opening angle should be as small as possible.

 

4. Always pay attention to "bath" the constant temperature and humidity test chamber. The surface of the compressor and condenser should be cleaned every two to three months. The more dust, the worse the heat dissipation effect, and the greater the power consumption. Clean When you need to cut off the power, wipe clean with a damp cloth.

Pub Time : 2020-09-23 14:55:37 >> News list
Contact Details
Dongguan Haida Equipment Co.,LTD

Contact Person: Mr. Mak

Tel: 13662707979

Send your inquiry directly to us (0 / 3000)