Payment & Shipping Terms:
|Port:||± 0.2 ℃|
universal tensile testing machine,
compressive strength testing machine
LCD Plastic Testing Machine , Rubber Melt Flow Rate Tester
Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate ratio FRR and other functions, this machine high precision temperature control, key parts nitriding treatment, high strength and hardness , small deformation accurately measure the flow rate which provides a good condition.
|Testing range||0.1-800.00g/10min (MFR); 0.1-800.00 cm3/10min(MVR)|
|Temperature range||Room temperature-400°C|
|Standard loads||325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g|
|Combination load||325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g|
|Material cutting method||Manual, timing and automatic cutting|
|Land of piston||Diameter 9.4742±0.0076mm, length: 6.35±0.13mm|
|Thin hole pattern||
External diameter: 9.5±0.02mm;
|Machine Size||(L×W×H) 40×51×60cm|
|Accessory||One set computer& software, one tool box, one piece operation video CD and one piece English manual|
|Design standard||ASTM-D1238, ISO 1133|
HD-R804-1 type with industrial PLC programmable controller, LCD operating platform, temperature part is separate temperature unit, LED digital display. Automatic temperature control aircraft from the operating method is divided into manual, time control, automatic three cut material way, to achieve Quality Act (MFR) and the volumetric method (MVR) two kinds of test methods; aircraft to the measured temperature of the test material the melt density, the system also has the temperature calibration.
Melt Flow Rate Tester is suitable for plastics such as polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, poly (vinyl chloride) Poly (POM), polycarbonate (PC) resin, and the like
Thermoplastic melt flow rate (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow characteristics. For thermoplastics and chemical fiber raw materials, quality assurance of products and other products of great significance.
According to the standard:
This instrument reference standards: ISO 1133, ASTM D1238, JIS-K72A, GB/T3682, JB/T5456, JJG 878
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!
Contact Person: salesmanager