|
Product Details:
Payment & Shipping Terms:
|
| Display: | LCD | Humid. Range: | 20 ~ 98 Percent R.H. |
|---|---|---|---|
| Material: | Stainless Steel Plate(SUS304) | Product Name: | Thermal Cycling Device |
| System: | Balanced Temperature|Balanced Temperature & Humidity Control System | Temp. Range: | -70°C~150°C |
| Power: | LCD | ||
| Highlight: | humidity temperature test chamber,humidity and temperature controlled chamber |
||
Temperature Humidity Chambers With Stainless Steel Plate
INTRODUCTION:
Temperature Humidity Chambers can simulate both temperature and humidity. Controlled humidity from 20%RH to 98%RH can be maintained within the dry-bulb temperature range of -70°C to +150°C, For lower dewpoint conditions (low RH or relative humidity at low dry-bulb temperatures), you will need dry air purge or GN2 (gaseous nitrogen) purge. See the humidity range chart on the specification page of each temperature-humidity chamber for humidity range limits.
GENERL SPECIFICATIONS :
Power supply source: three-phase, 380V±10%, 50Hz (can be appointed)
Gross Weight: 250kg
HS Code: 8479899990
STANDARD FEATURES:
| Item | Parameter |
| Inner container | 600x850x800mm(W*H*D) |
| Outer case | 1200x1770x1400mm(W*H*D) |
| Temperature range | -70℃ ~ 150℃ |
| Humidity range | 20%RH~98%RH |
| Weight | 400 kg |
| Temperature and humidity deviation | ±0.5℃,±2%R•H |
| Average difference of temperature and humidity | ±2℃,±3%R•H |
| Heating rate | ≤2.5℃/min |
| Cooling rate | 0.7~1.2℃/min |
| Humidity rate | +2%R.H /-3%R.H |
| Refrigerant | R23/R404A |
| Compressor | France taikang |
| Microcomputer & display screen | Youyi e-560/600 |
| Drive motor | wind flow |
| Temperature and humidity sensor | Japan |
| Equipped | RS-232 can be connected to a computer to output test data to save 12 safety protection devices |
| Electronic 8 | Mechanical 4 |
APPLICATIONS:
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
CHAMBER DESIGN FEATURES:
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain
PROGRAMMABLE CONTROLLER:
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
Contact Person: Mary
