|
Product Details:
Payment & Shipping Terms:
|
| Power: | Electric | Product Name: | Environmental Testing Chambers |
|---|---|---|---|
| Model: | HD-E703-80 | Type: | Programmable Thermal Shock Testers |
| Control: | Color Touch Panel Control System | Interal Dimension: | (W×H×D)50×40×40 Cm |
| Power(K.W): | 20 | Output Mode:: | PID+SSR(control Method) |
| Resolution:: | Temperature:0.1°C | Senor:: | T×4 |
| Highlight: | 20kw Thermal Shock Test Chambers,20kw Temperature Humidity Chambers,lcd temperature humidity chambers |
||
Thermal Shock Test Machine/Humidity And Temperature Testing Equipment
Description:
Thermal Shock Test Chamber is designed and manufactured according to user requirements, and is suitable for high and low temperature impact tests and storage and testing in high temperature or low temperature environments of aircraft, aerospace, military, warships, electrical, electronics and other products. Provide users with corresponding climatic and environmental accelerated tests on the whole machine (or parts), electrical appliances, instruments, materials, coatings, coatings, etc.
Programmable Thermal Shock Testers:
1.The thermal shock tester is divided into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.
2.The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.
3.High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.
4.Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
5.Both 2 zone and 3 zone shocks can be chosen.
6.All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
7.Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.
8.Machine can be shut down automatically in case of electrical power instabilities.
Specification:
|
Model |
HD-E703-80 Programmable Thermal Shock Testers |
|
Interal Dimension: |
(W×H×D)50×40×40 cm |
|
Structure: |
Two chambers design(the hot chamber or the cold chamber) |
|
Damper device: |
Forced air drived damper |
|
Interior material: |
SUS# Stainless steel plate |
|
Exterior material: |
SUS# Stainless steel plate |
|
Basket material: |
SUS# Stainless steel plate |
|
Refrigeration: |
Cascade refrigeration system |
|
Cooling method: |
Water |
|
Ambient temperature: |
0°~30° |
|
Preheating temperature: |
60.00°C~200.00°C |
|
Precooling temperature: |
subzero 10.00°C~subzero 70.00°C |
|
H.T. Shocking: |
above freezing 60.00°C~150.00°C |
|
L.T. Shocking: |
subzero 10.00°C~subzero 65.00°C |
|
Temperature uniformity: |
±2.00°C |
|
Simulated load ic |
5.0kg |
|
HT IN-Zone |
subzero 65.00°C~above freezing 150.00°C/5min |
|
LT IN-Zone |
above freezing 150.00°C -subzero 65.00°C |
|
Preheating time: |
30MIN |
|
Precooling time: |
60MIN |
|
Senor: |
T×4 |
|
Controller: |
OYO8226 |
|
Setting range: |
Temperature:subzero 100.00°C~above freezing 200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999 |
|
Resolution: |
Temperature:0.1°C |
|
Output mode: |
PID+SSR(control method) |
|
Power(K.W) |
20 |
Contact Person: Mary
