Send Message
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Services
Dongguan Haida Equipment Co.,LTD
Home News

Performance Testing of Paper Products

China Dongguan Haida Equipment Co.,LTD certification
China Dongguan Haida Equipment Co.,LTD certification
The instruments you recommend are very suitable for the testing needs of our laboratory products, after-sale is very patient to answer all our questions, and guide us how to operate, very nice.

—— Div Harish

You are very professional partners and we are willing to establish long-term cooperative relations with you.

—— Wojtek Krawczyk

On behalf of the company to visit your factories and companies, the technical staff is very professional and patient, I think I would be happy to cooperate with you again.

—— Manuel Munoz

I'm Online Chat Now
Company News
Performance Testing of Paper Products
Latest company news about Performance Testing of Paper Products

Inaccurate quantitative or strength test data for paper products is the most common problem, which leads to poor precision of the instrument and inaccurate test feedback from customers.In addition to the precision design decision of the machine itself, it is most likely to be caused by the wet lag effect.So what is the hygroscopic effect?

Hygroscopic effect: paper under certain relative humidity conditions by low moisture moisture and reach the balance of moisture content than the same relative humidity by high moisture dehumidification and reach the balance of moisture content is low.Referring to the Tappi T402 standard, the influence of wet lag effect was identified: 5%-25% impact on test performance.As can be clearly seen from the graph of humidity and moisture content in the following figure, for example, 1% moisture lag effect on 6% moisture content is verified by comparative experiment and it is found that 16% test result is affected by this effect.According to GB/T10739 standard atmospheric determination method, under the experimental conditions of 23℃ and 50%RH, a sudden change of 1℃ will bring a change of 3%RH.

So how do you solve the problem of moisture lag?Thermohygroscopic treatment is required -- the process of equalizing the moisture content of the sample between the atmospheres at a specified temperature.Temperature and humidity treatment time: generally 4 hours for good circulation conditions, 5-8 hours for high quantification, 48 hours for high quantification or special materials.The basis for the determination is that the balance is reached when the weighing difference between the samples is no more than 0.25% of the mass of the samples after the two weighing reaches more than 1 hour.

For errors in measurement, repeatability and reproducibility experimental analysis are needed to find out the main factors in order to serve customers and explain the corresponding problems.

Pub Time : 2021-05-08 10:48:33 >> News list
Contact Details
Dongguan Haida Equipment Co.,LTD

Contact Person: Ms. Kelly

Send your inquiry directly to us (0 / 3000)