In order to serve mask manufacturers, haida international instrument for epidemic prevention and control to make a contribution, has been fully restored to the factory, overtime production of mask detector, refueling for the fight against the epidemic!
1.Product Introduction
The instrument is suitable for measuring the moisture resistance and water resistance of medical protective materials and textile materials.
2.Product compliance standard
- YY/T1632-2018 《Medical protective clothing material impact resistance water penetration test method (compatible with type 1 and type Ⅱ)》
- AATCC42-2013 《Impact permeability test method》
- GB/T 24218.17-2017 《Test methods for textile nonwovens》 Part 17: determination of impermeability (spray impact method)
3.Product characteristics
- Stainless steel, corrosion resistant and durable.
- Easy to use, no need to learn to use.
1.Product Introduction
Masks tensile tester is mainly used for all kinds of disposable masks and surgical masks for routine mechanical performance test, also widely used in medical equipment resistance to bending, a scalpel (needle sharpness, syringe sliding performance, body fit) detection, such as fiber, plastics, paper, cardboard, film and other non-metallic materials jacking, RuanSu packing heat sealing strength, tear, drawing, piercing and compression, ampoule bottle breaking strength, 180 degrees 90 degrees stripping, stripping, shear force and thermal bonding strength test items.
At the same time, this instrument can measure the paper's tensile strength, tensile strength, elongation, fracture length, tensile energy absorption, tensile energy index, tensile energy absorption index and other items.
2.Product compliance standard
- YY0469-2011 《Surgical mask》
- YY/T 0969-2013 《Disposable surgical mask》
- GB/T3923-2013 《Disposable surgical mask》
3.Product characteristics
- The clamping design method of imported instrument fixture is adopted to avoid the detection error caused by the operator's technical problems.
- Imported custom high sensitivity load element, imported lead screw to ensure accurate displacement.
- It can be arbitrarily selected in the speed range of 5-600mm/min, and this function can satisfy the detection of 180° stripping, ampoule breaking force, film tension and other samples.
1.Product Introduction
Mask fabric fuzz and pilling tester is mainly used to test the wear resistance of textile, footwear and other layers, lining, substrate and similar fabrics. According to the standard friction cloth surface, the friction of the test object can be divided into wet and dry state tests. Under certain times of friction, the difference between the comparison and the original object can be observed and evaluated by Lissajous direction property friction.
2.Product compliance standard
ISO12947.2-1988ISO12947.3-1988GB/T21196.2-2007GB/T21196.3-2007ASTM-D4966
3.Product characteristics
- Scientific structure design, no need to move the cover plate can easily load and unload samples
- A variety of test modes are available for selection, simultaneously make the ball and wear resistance function, and can implement national and American standards
Your message must be between 20-3,000 characters!