Payment & Shipping Terms:
|Material:||SUS 304 Steel||Product Name:||UV Aging Test Chamber|
|Temperature Range:||RT～70℃||Temperature Fluctuation:||±2℃|
|Temperature Control:||PID SSR Control||UV Lamps:||Imported Atlas UV-A: 315-400nm (8pcs, 1600h Lifetime)|
uv aging test chamber,
aging test machine
ASTM D4799 High Precision UV Aging Test Chamber
UV aging test chamber using fluorescent UV lamp as a light source, by simulating the natural sunlight in the ultraviolet radiation and condensation, the material weathering test to obtain the results of the weather resistance of the material.
Application industry (not limited to the following):
|Chamber material||SUS#304 stainless steel|
|Temperature control||PID SSR control|
|Controller||Programmable controller, LCD touch screen|
|Control mode||Balance temperature humidity control (BTHC)|
|Test cycle setting||Exposure, condensation and water spray test cycle is programmable|
|Distance from sample to lamp||50±2mm|
|Centre distance between the lamp||70mm|
|UV lamps||Imported Atlas UV-A: 315-400nm (8pcs, 1600h lifetime)|
|Standard Specimen Size||75×290mm (24pcs) or 75x150mm (48pcs), max. thickness 5mm|
|Testing time||0～999H, adjustable|
Overload short circuit protection
Over temperature protection
Water lacking protection
Earth leakage protection
Auto shut off protection
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.
The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.
Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternating and circularly.
Test Specimen Mounting:
The standard test specimen holder accommodates 16 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.
Test standard(inculding but not limited to... ):
Compliance with ASTM G53-77 specifications GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS and SAE.