Payment & Shipping Terms:
|System:||Balanced Temperature||Temp. Range:||-70°C~150°C|
|Size:||100*100*100cm||Temperature And Humidity Range:||-70°C~150°C; 20%-98%R.H|
|Compressor:||Closed Compressor (French Tecumseh Or German Copeland )|
1000l Laboratory Temperature Humidity Chambers With Stainless Steel Materials
1. Function and Features
1) The Temperature Humidity Chambers are mainly used in testing the adaptability of electronics, electrical appliances, food, automobile, rubber and plastic, metal and other products, parts and materials in the high and low temperature alternating hot and humid environment when storage, transport and using；
2)Temperature Humidity Chambers is an reliable test equipment for all kinds of electronic, electrical, electronics, plastics raw materials and devices to do testing such as cold, heat, moisture, resistance to dry and the quality control ；
3)Especially suitable for optical fiber, LCD, crystal, inductor, PCB, batteries, computers, mobile phones, rubber, plastics and other product.
4)The new perfect design, the appearance of high texture level, the system extracts Japan, West Germany, the essence of design and manufacture of advanced technology.
5)Balanced temperature humidity control system (BTHC), to PID mode control SSR, so that heated humidification system was equal to heat loss capacity, it could be used long-term stability;
6)All-capillary, automatic load capacity adjustment system technology, more expansion valve system more stable and reliable, precise temperature and humidity control, heating and cooling rate of rapid, steady, uniform, saving valuable time for users.
JJF-1101,GB/T 10592,GB/T 10586
YD/T 2061,HB 7122.3,6783.7,GJB 5382.7,GJB 150,GB/T 2423,5170.2,5170.5,5179.2, ASTM E512,NF EN 60068-2-38,CNS 12565,12566,KS C0227,KS C022
|Internal dimension||(W*D*H) 1000*1000*1000mm|
|External dimension||(W*D*H) 1500*1380*1900mm|
|Humidity range||20~98%R.H. (Refer Image below)|
|Cooling speed||1℃/min in average (without loading)|
|Heating speed||3℃/min in average (without loading)|
|Internal chamber material||SUS#304 stainless steel, mirror finished|
|External chamber material||Stainless steel with paint spray|
|Cooling method||Air cooling|
LCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic test
|Insulation material||50mm high density rigid Polyurethane foam|
|Heater||Explosion-proof type SUS#304 stainless steel fins radiator pipe heater|
|Compressor||France Tecumseh compressor|
|Temperature sensor||PT-100 dry and wet bulb sensor|
|Observation window||Tempered glass|
|Testing hole||Diameter 50mm, for cable routing|
|Safety protection device||
Protection for leakage
Compressor overvoltage and overload
Heater short circuit
4. The original device configuration:
Exterior material:SUS＃304 Stainless steel
Interior material:SUS＃304 cold-roll steel sheets with rust prevention or SUS#304 Stainless steel plate
Insulation Material:PU foam and fiberglass
Moist material:Glass fiber
Heaters:Nicochrome Stainless steel pipe heater
Humidification pipe:Evaporation occurs stainless steel electric mode of the U-shaped humidifier
Air circulation system: 60W high temperature motor, Wind round stainless steel multi-wing, special air circulation system with adjustable.
Door:Singer door,Window 280mm×265mm×40 mm three vacuum layers
Box: Foshan Photo
Water tank:Stainless steel water tank,Automatic pump,Alarm device of water shortage ,Water shortage alarm,Stop to protect when long water shortage.
Cooling system and heating system:
Compressor:Tecumseh of France, all closed.
Refrigerant:R23 / R404A Environmental protection refrigerant (DuPont of USA)
Condenser: Air Force Taiwan Kuwait shell and tube condenser
Evaporator: Taiwan Kuwait force fins multi zone automatic load capacity adjustment
Expansion of the system: capacity control of cooling system
Refrigeration Service parts: all imported electromagnetic valve (Japan, "Heron House), the pressure controller (Danfoss), the oil separator (Danfoss) and other cooling accessories
1)Heating and cooling mode:PID constant way of cooling capacity to control SSR, larger than the cooling capacity of the heating temperature, heat flux less than the cooling capacity of the cooling
2)Normal mode:Balanced temperature humidity control system (BTHC), to PID mode control SSR, so that heated humidification system is equal to amount of heat and moisture loss
3)The temperature and humidity controller:Controller using the controller: South Korea imported "TEMI" 880-type film type keypad programmable LCD display PID temperature controller, a 100 group program memory 1200 paragraphs, together with groups of PID control.
Main electrical components:Taiwan Adventist AC contactor,Thermal relay,Time Relay,OMRON AC relay, Three controller Korea,Italian dry protector etc.
Safety devices:water protection,water shutdown protection,high-pressure compressor protection,compressor thermal protection,compressor overload. protection,fast fuse,buzzer alarm,overload protection.
Temperature:0℃～35℃,Relative humidity:≤85%,Atmospheric pressure:86kPA～106kPa
Installation site should be ground flat,and ventilation.
Equipment without a strong vibration around.
No strong magnetic fields affect the surrounding equipment.
The equipment around the non-flammable, explosive, corrosive substances, and dust
Left around the proper use of equipment and maintenance of space.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
--24 Hours online service for your consult.
--Help choose right model,and a series of service,person,advise.
2. Middle service:
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
3. After sale service :
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.